Buttons; Performing A Restart Immediately By Pressing A Button - Auerswald COMmander 6000 Advanced Information

Buttons

COMmander 6000: On the Base Cuircuit Board of the PBX, the various
buttons are located to e. g. reboot the PBX, to restore the previous firmware
or to set the PBX to factory settings.
COMmander 6000R/RX: On the CPU module of the PBX, the various
buttons are located to e. g. reboot the PBX, to restore the previous firmware,
to set the PBX to factory settings or to shut down the PBX.

Performing a Restart Immediately by Pressing a Button

Warning: Touching voltage-carrying conductors or phone
connections can cause life-threatening electric shocks.
• For some installation and maintenance work, it is
• Only a qualified electrician may perform installation work
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
necessary to open the PBX while it is in operation (qualified
electrician only). Make sure that the PBX is never left
unattended while working with an open casing. Close the
casing after completing this work.
within an open casing or service work using the buttons
inside the casing. If necessary, commission a specialised
dealer to perform this work.
Appendix Hardware
Buttons
1057