Restoring Firmware At The Touch Of A Button - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Appendix Hardware

Warning: Power surges, which can occur during electrical

storms, can cause life-threatening electric shocks and

damage or destroy the PBX.

• Do not open the PBX during an electrical storm.

1. Press the Reset button (for COMmander 6000 on the base circuit

board; for COMmander 6000R/6000RX at the front of casing).

The Power LED lights up/flashes in red and orange for up to two

When the Power LED lights up in green again, the restart is complete

and the PBX is ready for operation.

Note: If the Power LED remains continuously lit in red, an error has

occurred. Please contact your dealer or the manufacturer directly.

Restoring Firmware at the Touch of a Button

Requirements:

Firmware update, carried out

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Commander 6000r