NEC NEAX 2000 Programming Manual page 1083

GENERAL DESCRIPTION
If a termination of an incoming call is indicated respectively on Answer key and Line key on a D
term
the D user can answer the incoming call by lifting the handset.
STATION APPLICATION
term
All D s
OPERATING PROCEDURE
1. An incoming call has terminated to the D
2. Lift the handset; Answer the incoming call.
SERVICE CONDITIONS
1. This service feature is allowed or denied according to the Service Feature Class assigned to each sta-
tion.
2. Priority for answering incoming calls is as follows:
a. Voice Call
b. Incoming Call of My Line
c. Incoming Call on Trunk Line
d. Incoming Call on Sub Line
3. RINGING LINE PICKUP - D
4. PRIME LINE PICKUP - D
Speaker key is used to answer the call. If necessary, the PRIME LINE PICKUP feature can be disa-
bled on a per station basis.
RINGING LINE PICKUP - D
term
.
term
has priority over PRIME LINE PICKUP - D
term
takes priority over RINGING LINE PICKUP - D
ND-91285-001(E)
DECEMBER, 1999
term
term
in any case.
term
Revision 1.0
(1/1)
term
,
when the
Page 301