Show Service-Acl Interface - Dell N1100-ON Reference Manual

show service-acl interface

This command displays the status of LLPF rules configured on a particular
port or on all the ports.
Syntax
show service-acl interface {interface-id | all}
• interface-id—An Ethernet interface identifier or a port channel interface
identifier. See
representation.
Default Configuration
UDLD is blocked by default. No other protocol is blocked by default.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console#show service-acl interface te1/0/1
console(config-if-Te1/0/1)#show service-acl interface te1/0/1
Service-acl Interface Te1/0/1
Protocol
---------------
CDP
VTP
DTP
UDLD
PAGP
SSTP
ALL
Interface Naming Conventions
Mode
----------
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
for interface
Layer 2 Switching Commands
281