Ntp Authentication-Key - Dell C9000 Series Reference Manual

ntp authentication-key

Specify a key for authenticating the NTP server.
C9000 Series
Syntax
ntp authentication-key number md5 [0 | 7] key
Parameters
number
md5
0
7
key
Defaults NTP authentication is not configured by default. If you do not specify the option [0 | 7],
0 is selected by default.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.11.1
8.2.1.0
7.6.1.0
7.5.1.0
Specify a number for the authentication key. The range is from 1
to 4294967295.
This number must be the same as the number parameter
configured in the ntp trusted-key command.
Specify that the authentication key is encrypted using MD5
encryption algorithm.
Specify that authentication key is entered in an unencrypted
format (default).
Specify that the authentication key is entered in DES encrypted
format.
Enter the authentication key in the previously specified format.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Added options [0 | 7] for entering the authentication key.
Introduced on the S-Series.
Introduced on the C-Series.
System Time and Date 2166