Cisco ONS 15454 DWDM Installation And Operation Manual page 1082

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

C.2 Administrative States
Table C-2
ONS 15454 Secondary States
ANSI Secondary
State
ETSI Secondary State
AINS
automaticInService
DSBLD
disabled
FLT
failed
MEA
mismatchOfEquipment
MT
maintenance
SWDL
softwareDownload
UAS
unassigned
UEQ
notInstalled
(Unequipped)
C.2 Administrative States
Administrative states are used to manage service states. Administrative states consist of a PST and an
SST.
Table C-2
A change in the administrative state of an entity does not change the service state of supporting or
Note
supported entities.
Table C-3
ONS 15454 Administrative States
ANSI Administrative
ETSI Administrative State
State (PST,SST)
(PST,SST)
IS
Unlocked
IS,AINS
Unlocked,automaticInService
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
C-2
Definition
The entity is delayed before transitioning to the
IS-NR (ANSI)/Unlocked-enabled (ETSI) service state. The transition to
IS-NR/Unlocked-enabled depends on correction of conditions. Alarm
reporting is suppressed, but traffic is carried. Raised fault conditions,
whether or not their alarms are reported, can be retrieved on the Cisco
Transport Controller (CTC) Conditions tab or by using the TL1
RTRV-COND command.
The entity was manually removed from service and does not provide its
provisioned functions. All services are disrupted; unable to carry traffic.
The entity has a raised alarm or condition.
An improper card is installed. For example, an installed card is not
compatible with the card preprovisioning or the slot. This SST applies
only to cards.
The entity has been manually removed from service for a maintenance
activity but still performs its provisioned functions. Alarm reporting is
suppressed, but traffic is carried. Raised fault conditions, whether or not
their alarms are reported, can be retrieved on the CTC Conditions tab or
by using the TL1 RTRV-COND command.
The card is involved in a software and database download. This SST
applies only to cards.
The card is not provisioned in the database. This SST applies only to cards.
The card is not physically present (that is, an empty slot). This SST applies
only to cards.
Table C-3
lists the ANSI and ETSI administrative states supported by the ONS 15454. See
for SST definitions.
Appendix C
Definition
Puts the entity in service.
Puts the entity in automatic in-service.
DWDM Administrative and Service States
August 2005

Advertisement

Table of Contents
loading

Table of Contents