Coordinate Measurement; Distance Measurements - Guidelines For Correct Results - Leica TS01 User Manual

4.5.4
Access
Measure coordinates
4.6
Description
34
3. To check the slope distance, press
switch between display views.
☞ Press Mode to switch between measuring modes: Standard, Quick,
Track, Repeat, Average. The EDM Mode:EDM Mode: remains
unchanged.
Press to return to the standard surveing screen.
☞ Press EDM to change between prism and non-prism mode.
Press m/ft to change between the units meter and feet.
☞
☞ Press OffSet to enter the offset function.
Press SetOut to enter the Set Out app.
☞
☞ Refer to 5 Settings

Coordinate Measurement

1. Power on to enter the standard survey interface.
2. Press button on the keyboard.
1. Align to the target.
2. Press Meas.
The coordinates are displayed.
Press Mode to switch between measuring modes: Standard, Quick,
☞
Track, Repeat, Average. The EDM Mode:EDM Mode: remains
unchanged.
Press to return to the standard surveing screen.
Press EDM to change between prism and non-prism mode.
☞
3. Press :
hr: The height of the prism
hi: The height of the instrument
STN: The coordinates of the station
4. Press :
OffSet to enter offset function.
BS to enter the back-sight orientation program.
m/ft to toggle between distance unit meter and feet.

Distance Measurements - Guidelines for Correct Results

An EDM is incorporated into the instrument. The distance can be determined
by using a visible red laser beam which emerges coaxially from the telescope
objective. There are two EDM modes:
Prism measurements
•
Reflectorless measurements
•
button on the keyboard to
for more information on settings.
Operation