Apps; Common Fields; Survey; Set Out - Leica TS01 User Manual

7
7.1
Description of fields
7.2
Description
Access

Survey

7.3
Description

Apps

Apps

Common Fields

The following table describes common fields that are found within the firm-
ware apps. These fields are described here once and not repeated in the app
chapters unless the field has a specific meaning within that app.
Field Description
PointID: Point ID of the point.
hr Height of the reflector.
Hz: Horizontal direction to the point.
V : Vertical angle to the point.
Hd : Horizontal distance to the point.
Sd : Slope distance to the point.
Height Height to the point.
E : Easting coordinate of the point.
Northing coordinate of the point.
N :
Z : Height coordinate of the point.
Survey
Survey is an app used for the measurement of an unlimited number of points.
It includes pre-settings for the job, station and orientation prior to beginning a
survey.
1. Select Survey from the Main Menu.
2. Complete the pre-settings. Refer to
Key Description
Meas To execute a distance measurement and store the displayed
values.
Store To save the displayed values without executing a distance
measurment.
Dist To execute a distance measurement.
To switch between individual and running point numbers.
Code To add a code to the measured point.
OffSet To apply an offset to the measurement.

Set Out

Set Out is an app used to place marks in the field at predetermined points.
These predetermined points are the points to be staked. The points to be
staked may already exist in a job on the instrument, or be manually entered.
6.2 Starting an App.
49