Operation; Instrument Setup - Leica TS03 User Manual

4
4.1
Description
☞
Tripod

Operation

Operation

Instrument Setup

This topic describes an instrument setup over a marked ground point using the
laser plummet. It is always possible to set up the instrument without the need
for a marked ground point.
Important features
It is always recommended to shield the instrument from direct sunlight and
•
avoid uneven temperatures around the instrument.
The laser plummet described in this topic is built into the vertical axis of
•
the instrument. It projects a red spot onto the ground, making it apprecia-
bly easier to centre the instrument.
The laser plummet cannot be used with a tribrach equipped with an optical
•
plummet.
TSOX_012b
TSOX_012a
TSOX_012c
When setting up the tripod pay
attention to ensuring a horizontal
position of the tripod plate. Slight
corrections of inclination can be
made with the foot screws of the
tribrach. Larger corrections must be
done with the tripod legs.
Loosen the clamping screws on the
tripod legs, pull out to the required
length and tighten the clamps.
a
a In order to guarantee a firm
foothold sufficiently press the
tripod legs into the ground.
b When pressing the legs into
the ground note that the
force must be applied along
b
the legs.
Careful handling of tripod.
Check all screws and bolts for
•
correct fit.
• During transport, always use
the cover supplied.
Use the tripod only for survey-
•
ing tasks.
35