Ipv6 Ospf Bfd All-Neighbors - Dell Z9500 Command Reference Manual

Defaults See Parameters
Command CONFIGURATION
Modes
Command
Version
History
9.2(1.0)
9.2.(0.0)
8.2.1.0
7.6.1.0
7.4.1.0
Related show bfd neighbors
Commands specified interface.

ipv6 ospf bfd all-neighbors

Establish BFD sessions with all OSPFv3 neighbors on a single interface or use non-default BFD session
parameters.
Z9500
Syntax
ipv6 ospf bfd all-neighbors [disable | [interval interval
min_rx min_rx multiplier value role {active | passive}]]
To disable all BFD sessions on an OSPFv3 interface implicitly, use the no ipv6
ospf bfd all-neighbors disable command in interface mode..
Parameters
disable
interval
milliseconds
min_rx
milliseconds
352
The default is Active.
Description
Introduced on the Z9500.
Introduced on Z9000, S4810, and S4820T.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
– displays the BFD neighbor information on all interfaces or a
(OPTIONAL) Enter the keyword disable to disable BFD on
this interface.
(OPTIONAL) Enter the keyword interval to specify non-
default BFD session parameters beginning with the
transmission interval. The range is from 50 to 1000. The
default is 100.
Enter the keywords min_rx to specify the minimum rate at
which the local system receives control packets from the
remote system. The range is from 50 to 100. The default is
100.
Bidirectional Forwarding Detection (BFD)