Bfd Protocol-Liveness - Dell Z9500 Command Reference Manual

Defaults Refer to Parameters.
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.10.0
8.2.1.0
7.6.1.0
7.4.1.0
Example
Dell(conf-if-te-0/3)#bfd interval 250 min_rx 300 multiplier 4
role passive
Dell(conf-if-te-0/3)#

bfd protocol-liveness

Enable the BFD protocol liveness feature.
Z9500
Syntax
bfd protocol-liveness
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
350
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Introduced on the Z9500.
Bidirectional Forwarding Detection (BFD)