Bidirectional Forwarding Detection (Bfd) - Dell Z9500 Command Reference Manual

Bidirectional Forwarding Detection (BFD)

Bidirectional forwarding detection (BFD) is a detection protocol that provides fast forwarding path failure
detection.
The Dell Networking OS implementation is based on the standards specified in the IETF Draft draft-ietf-
bfd-base-03.
bfd all-neighbors
Enable BFD sessions with all neighbors discovered by Layer 3 protocols virtual router redundancy
protocol (VRRP), intermediate system to intermediate system (IS-IS), open shortest path first (OSPF),
OSPFv3, or border gateway protocol (BGP) on router interfaces, and (optionally) reconfigure the default
timer values.
Z9500
Syntax
[vrrp] bfd all-neighbors [interval interval min_rx min_rx
multiplier value role {active | passive}]
Parameters
vrrp
interval
milliseconds
min_rx
milliseconds
multiplier value
role [active |
passive]
Bidirectional Forwarding Detection (BFD)
Enter the keyword vrrp in INTERFACE mode to enable BFD
for VRRP.
(OPTIONAL) Enter the keyword interval to specify non-
default BFD session parameters beginning with the
transmission interval. The range is from 50 to 1000. The
default is 100.
Enter the keyword min_rx to specify the minimum rate at
which the local system would like to receive control packets
from the remote system. The range is from 50 to 100. The
default is 100.
Enter the keyword multiplier to specify the number of
packets that must be missed in order to declare a session
down. The range is from 3 to 50. The default is 3.
Enter the role that the local system assumes:
• Active — The active system initiates the BFD session.
Both systems can be active for the same session.
7
345