Show Bfd Neighbors - Dell Z9500 Command Reference Manual

Related

show bfd neighbors

Commands
specified interface.
show bfd neighbors
Display BFD neighbor information on all interfaces or a specified interface.
Z9500
Syntax
show bfd neighbors interface [detail]
Parameters
interface
detail
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.8.0
8.4.1.3
356
— displays the BFD neighbor information on all interfaces or a
Enter one of the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet then the slot/port information.
• For a port-channel interface, enter the keyword port-
channel then a number. For the C-Series, Z-Series, and
S8410, the range is from 1 to 128.
• For VLAN interfaces, enter the keyword vlan then a
number from 1 to 4094. For ExaScale VLAN interfaces,
the range is 1 to 2730 (VLAN IDs can be from 0 to 4093).
(OPTIONAL) Enter the keyword detail to view detailed
information about BFD neighbors.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Added support for BFD for BGP on the S4810.
Added support for BFD for BGP on the E-Series ExaScale.
Bidirectional Forwarding Detection (BFD)