Avaya Communication Manager Administrator's Manual page 499

7
In the Community Name (read-only) field, type the name.
8
In the Community Name (read-write) field, type the name.
The user can query agents for information (SNMP GETSs) and send commands to an agent
(SNMP SETs).
9
In the SNMP version 2c section, check the Enable SNMP Version 2c box if SNMP Version 2 is
needed.
10
In the Community Name (read-only) field, type the name.
11
In the Community Name (read-write) field, type the name.
12
Scroll down to the SNMP Version 3 section and check the Enable SNMP Version 3 box if SNMP
Version 3 is needed.
This is the SNMP version of the protocol to be used in communicating with the SNMP agents on
the server.
13
In the User Name field, type the user name.
The user can query only for information.
Your entry must be in any alphanumeric format and up to 50 characters in length.
14
(Optional) In the Authentication Password field, type the security password.
Your entry must be in any alphanumeric format and up to 50 characters in length.
NOTE:
If you did not do
15
(Optional) In the Privacy Password field, type the security password.
16
In the IP Addresses for SNMP Access section, check either:
— Any IP Address, and go to
— Following IP addresses, and continue with
17
If you selected Following IP addresses, in the IP address 1 field, type the IP address.
The SNMP agents on this server can be programmed to accept incoming SNMP messages from a
restricted list of SNMP managers. If an SNMP message is received from an IP address not listed,
it is dropped.
18
Repeat Step 17
19
Press
ENTER
Displaying the MIB Reference Document
The Management Information Base (MIB) reference document lists the details of Communication
Manager data for SNMP management. The MIB can be used to interpret SNMP data that is supported by
the Communication Manager SNMP Agent.
To display the MIB reference document:
1
On the main page, under Alarms, click on SNMP Agents.
The system displays the SNMP Agents page.
2
Click on Download G3-Avaya-MIB.
The system displays a text file of the MIB.
Administrator's Guide for Avaya Communication Manager
November 2003
Step 14, you cannot do
Step
until all IP addresses are listed.
to save your changes.
Administering Media Servers
Step 15.
19.
Step 17.
SNMP Agents
499