Audible Message Waiting - Avaya Communication Manager Administrator's Manual

Att. Call Waiting Indication
Attendant call waiting allows attendant-originated or attendant-extended calls to a busy
single-line telephone to wait and sends distinctive call-waiting tone to the single-line user. Must
be set to y when the Type field is set to H.323. You should not set this field to y if the Data
Restriction field is y or the Switchhook Flash field is n, or if Data Privacy is enabled for the
telephone's class of service (COS). If any of these conditions are true, the telephone cannot
accept or handle call waiting calls.
Valid entries
y
n
c

Audible Message Waiting

The Audible Message Waiting tone indicates that the user has a waiting message. This field
appears only if Audible Message Waiting is set to y on the System-Parameters
Customer-Options screen.
Note that this field does not control the Message Waiting lamp.
Valid entries
y/n
Audix Name
Specifies which AUDIX is associated with the station.
Valid entries
Names assigned to
an AUDIX adjunct
Usage
Enter y to activate Call Waiting (without Caller ID information) for the
telephone. Default.
Call Waiting is not enabled for the station.
Enables the Caller ID Delivery with Call Waiting feature, which displays
CID information on for the waiting call. This value can only be entered
when the Type field is CallrID.
Usage
Enter y if you want the telephone user to receive stutter dial tone when
they have a waiting message and they go off-hook.
Usage
Must contain a user-defined adjunct name that was previously
administered on the IP Node Names screen.
Station
Issue 2.1 May 2006 1439