Network Access Authentication Port Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Password Type
Password
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.

Network Access Authentication Port Settings

This window is used to view and configure the network access authentication port settings.
To view the following window, click Security > Network Access Authentication > Network Access
Authentication Port Settings, as shown below:
The fields that can be configured in Network Access Authentication Port Settings are described below:
Parameter
Unit
From Port ~ To Port
Host Mode
VID List
Description
Select the password type option here. Options to choose from are
Plain Text and Encrypted.
Enter the password used here.
Figure 9-71 Network Access Authentication Port Settings Window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select the host mode option that will be associated with the selected
port(s) here. Options to choose from are Multi Host and Multi Auth. If
the port is operated in the multi-host mode, and if one of the hosts is
authenticated, then all other hosts are allowed to access the port.
According to 802.1X authentication, if the re-authentication fails or the
authenticated user logs off, the port will be blocked for a quiet period.
The port restores the processing of EAPOL packets after the quiet
period. If the port is operated in the multi-authenticated mode, then
each host needs to be authenticated individually to access the port. A
host is represented by its MAC address. Only the authorized host is
allowed to access.
After selecting the Multi Auth option as the Host Mode, the following
519