D-Link DXS-3600 Series Reference Manual page 129

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
DSCP
Source Port
Destination Port
IP Protocol
Action
New Outer VID
802.1P Priority
New Inner VID
Click the <<Back button to return to the previous window.
Click the Apply button to accept the changes made.
After clicking the Add Rule button next to an IPv6 type profile, the following page will appear.
Figure 5-36 VLAN Mapping Profile (IPv6, Add Rule) Window
The fields that can be configured in VLAN Mapping Rule are described below:
Parameter
Rule ID
Src-IPv6 Address
Dst-IPv6 Address
Action
Description
Enter the DSCP value here. The range is from 0 to 63.
Enter the source TCP/UDP port's number here. The range is from 1 to
65535.
Enter the destination TCP/UDP port's number here. The range is from
1 to 65535.
Enter the Layer 3 IP protocol value here. The range is from 0 to 255.
Select the action that will be taken here. Options to choose from are
Dot1q-Tunnel and Translate.
•
Dot1q-Tunnel: Specifies that the outer-VID will be added for
matched packets.
•
Translate: Specifies that the outer-VID will replace the outer-VID
of the matched packets.
Enter the new outer VLAN's ID here. The range is from 1 to 4094.
Select the 802.1p priority value here. The range is from 0 to 7. A lower
value has a higher priority.
After selecting Dot1q-Tunnel as the action, enter the new inner VLAN's
ID here. The range is from 1 to 4094. This option is only available
when Dot1q-Tunnel was selected as the action.
Description
Enter the VLAN mapping rule's ID here. If not specified, the rule ID
begins from 10 and is incremented by 10 for every new rule. The range
is from 1 to 10000
Enter the source IPv6 address and prefix length here.
Enter the destination IPv6 address and prefix length here.
Select the action that will be taken here. Options to choose from are
Dot1q-Tunnel and Translate.
•
Dot1q-Tunnel: Specifies that the outer-VID will be added for
matched packets.
•
Translate: Specifies that the outer-VID will replace the outer-VID
118