D-Link DXS-3600 Series Reference Manual page 262

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
The fields that can be configured in Register Keepalive Time are described below:
Parameter
Register Keepalive
Click the Apply button to accept the changes made.
After clicking the Show List button, the following page will appear.
The fields that can be configured are described below:
Parameter
ACL Type
ACL List
Click the Find button to display a list of access lists based on the selection made.
Click the View All button to display all configured access lists.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Apply button to use the selected access list.
Description
will start the suppression timer. During the suppression period, a DR
stops sending the register message to the RP.
Use this feature on the first hop router. The value of the register probe
time must be less than half the value of the register suppression time
to prevent a possible negative value in the setting of the register stop
timer. The minimal value for the register suppression time is 3. Select
the Default option to use the default value, which is 60 seconds.
Description
Enter the register keep-alive time value here. The range from 1 to
65525 seconds. Select the Default option to use the default value,
which is 185 seconds.
Figure 6-111 PIM Register Settings (Show List) Window
Description
Select the ACL type that will be used to display the type of existing
access lists in the table here. Options to choose from are IP ACL,
Expert IP ACL, IPv6 ACL, Expert IPv6 ACL, MAC ACL, and Expert
ACL.
Select the radio button of the access list in the table that will be used
here.
251