D-Link DXS-3600 Series Reference Manual page 298

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in BGP Community List Settings are described below:
Parameter
List Name
Type
Mode
Community Number
Regular Option
Regular Expression
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 6-159 BGP Community List Settings Window
Description
Enter the access list's name here that will be used in the BGP
community list configuration. This name can be up to 16 characters
long.
Select the access list's type here. Options to choose from are
Standard and Expanded.
Select the mode here. Options to choose from are Permit, Deny, and
None.
After selecting the Standard option as the type and the Permit or
Deny options as the mode, enter the community is a 32-bits integer
here. It can be a user-specified number represented by AA:NN, where
AA (AS number) is the upper part of the word and NN (community
number, user-specified) is the lower part of the word. Multiple numbers
(separated by comma) can be specified.
After selecting the Standard option as the type and the Permit or
Deny options as the mode, select the regular option here. Options to
choose from are Internet, Local AS, No Advertise, and No Export.
•
Internet: Specifies routes free to be advertised to all peers.
•
Local-AS: Specifies not to send out of the local AS or sub-
autonomous system of a confederation.
•
No Advertise: Specifies not to advertise the route to other BGP
peers.
•
No Export: Specifies not advertise to external peers.
After selecting the Expanded option as the type and the Permit or
Deny options as the mode, enter the regular expression for the
matching pattern here.
287