D-Link DXS-3600 Series Reference Manual page 500

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping

Global Settings, as shown below:

The fields that can be configured in DHCP Snooping Global Settings are described below:

DHCP Snooping

Information Option Allow

Source MAC Verification

Station Move Deny

Click the Apply button to accept the changes made.

DHCP Snooping Port Settings

This window is used to view and configure the DHCP snooping port settings.

To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping

Port Settings, as shown below:

The fields that can be configured in DHCP Snooping Port Settings are described below:

Figure 9-37 DHCP Snooping Global Settings Window

Select to enable or disable the DHCP snooping global status.

Select to enable or disable the option to globally allow DHCP packets

with the relay Option 82 on the untrusted interface.

Select to enable or disable the verification that the source MAC

address in a DHCP packet matches the client hardware address.

Select to enable or disable the DHCP snooping station move state.

When DHCP snooping station move is enabled, the dynamic DHCP

snooping binding entry with the same VLAN ID and MAC address on

the specific port can move to another port if it detects that a new

DHCP process belong to the same VLAN ID and MAC address.

Figure 9-38 DHCP Snooping Port Settings Window