D-Link DXS-3600 Series Reference Manual page 50

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in SNMP Group Settings are described below:
Parameter
Group Name
Read View Name
User-based Security Model
Write View Name
Security Level
Notify View Name
IP Address-List Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Figure 4-9 SNMP Group Table Settings Window
Description
Enter the group name of a maximum of 32 characters. The syntax is
general string that does not allow space.
Enter the read view name that the group user can access.
Select the security model here. Options to choose from are SNMPv1,
SNMPv2c, and SNMPv3.
•
SNMPv1 - Select to allow the group user to use the SNMPv1
security model.
•
SNMPv2c - Select to allow the group user to use the SNMPv2c
security model.
•
SNMPv3 - Select to allow the group user to use the SNMPv3
security model.
Enter the write view name that the group user can access.
When selecting SNMPv3 in the User-based Security Model drop-
down list, this option is available.
•
NoAuthNoPriv - Specify that there will be no authorization and
no encryption of packets sent between the Switch and a remote
SNMP manager.
•
AuthNoPriv - Specify that authorization will be required, but
there will be no encryption of packets sent between the Switch
and a remote SNMP manager.
•
AuthPriv - Specify that authorization will be required, and that
packets sent between the Switch and a remote SNMP manger
will be encrypted.
Enter a write view name that the group user can access. The notify
view describes the object that can be reported its status via trap
packets to the group user.
Enter the standard IP access control list (ACL) to associate with the
group.
39