D-Link DXS-3600 Series Reference Manual page 552

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
After clicking the Add MA button, the following page will appear.
The fields that can be configured in CFM MA Settings are described below:
Parameter
MA Name
MA VID
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Click the Add MEP button to add a new Maintenance association End Point (MEP) entry.
After clicking the Edit button, the following page will appear.
The fields that can be configured in the table are described below:
Description
•
Manage: Specifies to transmit the sender ID TLV with the
managed address information.
•
Chassis-Manage: Specifies to transmit the sender ID TLV with
the chassis ID information and the managed address
information.
Figure 10-3 CFM Settings (Add MA) Window
Description
Enter the Maintenance Association (MA) entry's name here. This name
can be up to 22 characters long. Each MA in an MD must have a
unique MA name. MAs configured in different MDs may have the same
MA identifier. When the MA entry is deleted, the configuration on it is
also deleted.
Enter the Maintenance Association (MA) entry's VLAN ID here. The
range is from 1 to 4094.
Figure 10-4 CFM Settings (Add MA, Edit) Window
541