Dhcpv6 Relay - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in DHCP Local Relay VLAN Settings are described below:
Parameter
DHCP Local Relay VID List
State
Click the Apply button to accept the changes made.

DHCPv6 Relay

DHCPv6 Relay Global Settings
This window is used to view and configure the DHCPv6 relay remote ID settings.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Global
Settings, as shown below:
The fields that can be configured in DHCPv6 Relay Global Settings are described below:
Parameter
IPv6 DHCP Relay Remote ID
Format
IPv6 DHCP Relay Remote ID
UDF
IPv6 DHCP Relay Remote ID
Policy
IPv6 DHCP Relay Remote ID
Figure 4-50 DHCP Local Relay VLAN Window
Description
Enter the VLAN ID for DHCP local relay. Tick the All VLANs check
box to select all VLANs.
Select this option to enable or disable the DHCP local relay on the
specific VLAN(s).
Figure 4-51 DHCPv6 Relay Global Settings Window
Description
Select to choose the sub-type of the remote ID. Options to choose
from are Default, CID with User Define, and User Define.
Select to choose the User Define Field (UDF) for remote ID. Options to
choose from are ASCII, and Hex.
•
ASCII - Select to enter the ASCII string with a maximum of 128
characters in the text box.
•
HEX - Select to enter the hexadecimal string with a maximum of
256 characters in the text box.
Select to choose Option 37 forwarding policy for the DHCPv6 relay
agent. Options to choose from are Keep, and Drop.
•
Keep - Select to discard the packet that already has the relay
agent Remote-ID Option 37.
•
Drop - Select that the DHCPv6 request packet that already has
the relay agent Remote-ID option is left unchanged and directly
relayed to the DHCPv6 server.
Select this option to enable or disable the insertion of the relay agent
66