Ipv6 - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Clear by MAC
Clear All
Click the Apply button to accept the changes made.

IPv6

IPv6 Snooping
This window is used to view and configure the IPv6 snooping settings.
To view the following window, click Security > IMPB > IPv6 > IPv6 Snooping, as shown below:
The fields that can be configured in Station Move Setting are described below:
Parameter
Station Move
Click the Apply button to accept the changes made.
The fields that can be configured in IPv6 Snooping Policy Settings are described below:
Parameter
Policy Name
Limit Address Count
Protocol
Description
Select this option to clear the entry table based on the MAC address
entered. Enter the MAC address that will be cleared in the space
provided.
Select this option to clear all entries that contain MAC addresses.
Figure 9-54 IPv6 Snooping Window
Description
Select the station move options here. Options to choose from are
Permit and Deny.
Description
Enter the IPv6 snooping policy name used here. This name can be up
to 32 characters long.
Enter the address count limit value used here. This value must be
between 0 and 511. Tick the No Limit option to disable this option.
Select the protocol that will be associated with this policy here. Options
to choose from are Disabled, DHCP, NDP, and All. DHCPv6
Snooping sniffs the DHCPv6 packets sent between the DHCPv6 client
and server in the address assigning procedure. When a DHCPv6 client
successfully got a valid IPv6 address, DHCPv6 snooping creates its
binding database. ND Snooping is designed for a stateless auto-
configuration assigned IPv6 address and manually configured IPv6
address. Before assigning an IPv6 address, the host must perform
501