D-Link DXS-3600 Series Reference Manual page 327

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
SNMP Server Traps VRRP
New master
SNMP Server Traps VRRP
Auth Fail
Non-owner-ping Response
Click the Apply button to accept the changes made.
The fields that can be configured in Virtual Router Settings are described below:
Parameter
VLAN
VRID
Virtual IP Address
VRRP Authentication
Interface Name
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Description
Select to enable or disable the SNMP server traps feature for the new
VRRP master. If enabled, once the device has transitioned to the
master state, a trap will be sent out.
Select to enable or disable the SNMP server traps feature for
authentication failures. If enabled, if a packet has been received from a
router whose authentication key or authentication type conflicts with
this router's authentication key or authentication type, then a trap will
be sent out.
Select to enable or disable the non-owner ping response feature here.
This feature is used to enable the virtual router in the master state to
respond to ICMP echo requests for an IP address not owned but
associated with this virtual router.
Description
Enter the VLAN interface's ID used here. The range is from 1 to 4094.
Enter the virtual router's ID used here. This ID is used to identify the
virtual router in the VRRP group. The range is from 1 to 255.
Enter the IPv4 address for the created virtual router group here.
Select to enable and then enter the plain text authentication password
for VRRP authentication on the interface here. This string can be up to
8 characters long. The authentication is applied to all virtual routers on
this interface. The devices in the same VRRP group must have the
same authentication password.
Enter the interface's name used here. This name can be up to 12
characters long.
Figure 6-193 VRRP Settings (Edit) Window
316