D-Link DXS-3600 Series Reference Manual page 328

Layer 2/3 managed 10gigabut ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Advertisement Interval
Preemption
Priority
Critical IP Address
Shutdown
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
Description
Enter the advertisement interval value here. This is the time interval
between successive VRRP advertisements by the master router. The
range is from 1 to 255 seconds. By default, this value is 1 second.
Select to enable or disable the preemption feature here. This feature is
used to allow a router to take over the master role if it has a better
priority than the current master.
Enter the priority value here. The range is from 1 to 254.
Enter the critical IPv4 address here. If the critical IP is configured on
one virtual router, the virtual router cannot be activated when the
critical IP address is unreachable. One VRRP group can only track one
critical IP.
Select to enable or disable the shutdown feature here. This feature is
used to disable a virtual router on an interface. Avoid the common
mistake of shutting down the IP address owner router before shutting
down other non-owner routers.
317

Advertisement

Table of Contents
loading

Table of Contents