D-Link DXS-3600 Series Reference Manual page 114

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
Click the View Detail button to view more detailed information about the VLAN on the specific interface.
Click the Edit button to re-configure the specific entry.
After clicking the VLAN Detail button, the following page will appear.
On this page, more detailed information about the VLAN of the specific interface is displayed.
Click the <<Back button to return to the previous page.
After click the Edit button, the following page will appear. This is a dynamic page that will change when a
different VLAN Mode was selected. When Access was selected as the VLAN Mode, the following page
will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
VLAN ID
Description
Select the switch unit that will be used for this configuration here.
Figure 5-18 VLAN Interface (VLAN Detail) Window
Figure 5-19 VLAN Interface (Access) Window
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk
Promiscuous, and Trunk Secondary.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
Select to enable or disable the ingress checking function.
Enter the VLAN ID used for this configuration here. This value must be
103