D-Link DXS-3600 Series Reference Manual page 106

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Figure 5-6 MAC Notification (MAC Notification Settings) Window

The fields that can be configured are described below:

MAC Address Notification

History Size

MAC Notification Trap State

From Port ~ To Port

Removed Trap

Click the Apply button to accept the changes made for each individual section.

After selecting the MAC Notification History tab, at the top of the page, the following page will be

Select to enable or disable MAC notification globally on the switch

Enter the time value between notifications. This value must be

between 1 and 2147483647 seconds. By default, this value is 1

Enter the maximum number of entries listed in the history log used for

notification. This value must be between 0 and 500. By default, this

Select to enable or disable the MAC notification trap state.

Select the stacking unit ID of the switch that will be configured here.

Select the range of ports that will be used for this configuration here.

Select to enable or disable the added trap for the port(s) selected.

Select to enable or disable the removed trap for the port(s) selected.