D-Link DXS-3600 Series Reference Manual page 138

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Sub Ring Name

Click the Back button to discard the changes made and return to the previous window.

Click the Apply button to accept the changes made.

After click the Show Detail button, the following window will appear.

After selecting the ERPS Brief tab option, at the top of the page, the following page will be available.

Select the checkbox and enter the physical ring's sub-ring name here.

This name can be up to 32 characters long. Select the Specify radio

button to configure this parameter as per normal. Select the None

radio button to revert this parameter to the default setting.

Select the checkbox and then select the switch's unit ID and the port

number that will be the first ring port of the physical ring. Select the

Specify radio button to configure this parameter as per normal. Select

the None radio button to revert this parameter to the default setting.

Select the checkbox and then select the switch's unit ID and the port

number that will be the second ring port of the physical ring. Select the

None option, from the drop-down menu, specifies that the inter-

connected node is a local node endpoint of an open ring. Select the

Specify radio button to configure this parameter as per normal. Select

the None radio button to revert this parameter to the default setting.

Figure 5-45 ERPS (View Detail) Window

Figure 5-46 ERPS (ERPS Brief) Window