D-Link DXS-3600 Series Reference Manual page 280

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Summary
Static
Multicast Protocol
Group Address
Source Address
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the entries.
IP Multicast RPF Table
This window is used to display Reverse Path Forwarding (RPF) information for a given unicast host
address.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast
RPF Table, as shown below:
The fields that can be configured in IP Multicast RPF Table are described below:
Parameter
IP Address
Click the Find button to locate a specific entry based on the information entered.
IP Multicast Forwarding Cache
This window is used to display the content of the IP multicast routing forwarding cache database.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast
Forwarding Cache, as shown below:
Description
Selecting this option specifies to display a one-line, abbreviated
summary of each entry in the IP multicast routing table.
Selecting this option specifies to display the multicast static routes.
Select this option and then select the multicast protocol that will be
used in this display here. Options to choose from are PIM-DM, PIM-
SM, and DVMRP.
•
PIM-DM: Specifies to display only the PIM-DM routes.
•
PIM-SM: Specifies to display only the PIM-SM routes.
•
DVMRP: Specifies to display only the DVMRP routes.
Select and enter the multicast group IP address here.
Enter the multicast source IP address here.
Figure 6-137 IP Multicast RPF Table Window
Description
Enter the unicast host's IPv4 address here.
Figure 6-138 IP Multicast Forwarding Cache Window
269