D-Link DXS-3600 Series Reference Manual page 151

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the View All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
The fields that can be configured in IGMP Snooping Groups Table are described below:
Parameter
VID
Group Address
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the entries.
IGMP Snooping Filter Settings
This window is used to view and configure the IGMP snooping feature's filter settings.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP
Snooping Filter Settings, as shown below:
The fields that can be configured in IGMP Snooping Rate Limit Settings are described below:
Parameter
Unit
From Port ~ To Port
Description
Click the radio button and enter a VLAN ID of the multicast group. The
range is from 1 to 4094.
Click the radio button and enter an IP multicast group address.
Figure 5-59 IGMP Snooping Filter Settings Window
Description
Select the switch's unit ID that will be used here.
Select the switch's port range that will be used here. This is only
140