D-Link DXS-3600 Series Reference Manual page 657

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Log Description
Event description: Power is recovered.
Log Message: Unit <unit-id> <power-descr> back to normal
Parameters description:
unitID: The unit ID.
power-descr: The power position and ID.
Event description: Air flow abnormal.
Log Message: Unit <unit-id> detecting abnormal air flow.
Parameters description:
unitID: The unit ID.
Event description: Air flow recovered.
Log Message: Unit <unit-id> abnormal air flow back to normal.
Parameters description:
unitID: The unit ID.
Port Security
Log Description
Event description: Address full on a port
Log Message: MAC address <macaddr> causes port security violation on
<interface-id>
Parameters description:
macaddr: The violation MAC address.
interface-id: The interface name.
Event description: Address full on system
Log Message: Limit on system entry number has been exceeded.
RIPng
Log Description
Event description: The RIPng state of interface changed
Log Message: RIPng-6-INTFSTATECHANGE :RIPng protocol on interface <intf-
name> changed state to <enabled | disabled>
Parameters description:
intf-name: Interface name.
Safeguard
Log Description
Event description: When the CPU utilization is over the rising threshold, the switch
enters exhausted mode.
Log Message: Unit <unit-id>, Safeguard Engine enters EXHAUSTED mode.
Parameters description:
unit-id: the unit ID
Event description: When the CPU utilization is lower than the falling threshold, the
switch enters normal mode.
646
Severity
Critical
Critical
Critical
Severity
Warning
Warning
Severity
Informational
Severity
Warning
Informational