D-Link DXS-3600 Series Reference Manual page 139

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Edit Instance button to configure the ERP instance.
After click the Edit Instance button, the following window will appear.
The fields that can be configured in Ethernet Instance Settings are described below:
Parameter
Description
R-APS Channel VLAN
Inclusion VLAN List
MEL
Profile Name
RPL Port
Description
Select the checkbox and enter the ERP instance's description here.
This description can be up to 64 characters long. Select the Specify
radio button to configure this parameter as per normal. Select the
None radio button to revert this parameter to the default setting.
Select the checkbox and enter the R-APS channel VLAN's ID for the
ERP instance here. The APS channel VLAN of a sub-ring instance is
also the virtual channel of the sub-ring. This value must be between 1
and 4094. Select the Specify radio button to configure this parameter
as per normal. Select the None radio button to revert this parameter to
the default setting.
Select the checkbox and enter the inclusion VLAN list here. A range is
identified when a hyphen (-) is used. For example VLANs 1 to 5 can be
entered as 1-5. A list is identified when commas (,) are used. For
example, use VLANs 1,3,5. The VLANs specified here will be
protected by the ERP mechanism. Select the Specify radio button to
configure this parameter as per normal. Select the None radio button
to revert this parameter to the default setting.
Select the checkbox and enter the ring MEL value of the ERP instance
here. This value must be between 0 and 7. The configured MEL value
of all ring nodes that participate in the same ERP instance should be
identical. Select the Specify radio button to configure this parameter
as per normal. Select the None radio button to revert this parameter to
the default setting.
Select the checkbox and enter the G.8032 profile's name here that will
be associated with this ERP instance. Multiple ERP instances can be
associated with the same G.8032 profile. The instances associated
with the same profile protect the same set of VLANs, or the VLANs
protected by one instance are a subset of LANs protected by another
instance. This name can be up to 32 characters long. Select the
Specify radio button to configure this parameter as per normal. Select
the None radio button to revert this parameter to the default setting.
Select the checkbox and then select the RPL port option here. Options
to choose from are Port0 and Port1. The option selected will be
128