System Attack Log; Time And Sntp; Clock Settings; Time Zone Settings - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

System Attack Log

This window is used to view and clear the system attack log.

To view the following window, click System > System Log > System Attack Log, as shown below:

The fields that can be configured are described below:

Click the Clear Attack Log button to clear the system attack log entries displayed in the table.

This window is used to view and configure the time settings for the Switch.

To view the following window, click System > Time and SNTP > Clock Settings, as shown below:

The fields that can be configured in Clock Settings are described below:

Click the Apply button to accept the changes made.

This window is used to view and configure time zones and Daylight Savings Time settings for SNTP.

Figure 3-21 System Attack Log Window

Select the stacking unit ID of the switch that will be displayed here.

Figure 3-22 Clock Settings Window

Enter the current time in hours (HH), minutes (MM), and seconds (SS)

here. For example, 18:30:30.

Enter the current day (DD), month (MM), and year (YY) here. For

example, 30/04/2015.