Jumbo Frame - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Error Disable Recovery Settings are described below:
Parameter
ErrDisable Cause
State
Interval
Click the Apply button to accept the changes made.

Jumbo Frame

This window is used to view and configure the Jumbo Frame size and settings. The switch supports
jumbo frames. Jumbo frames are Ethernet frames with more than 1,518 bytes of payload. The switch
supports jumbo frames with a maximum frame size of up to 12288 bytes.
To view the following window, click System > Port Configuration > Jumbo Frame, as shown below:
Figure 3-15 Error Disable Settings Window
Description
Select the error disabled cause here. Options to choose from are Port
Security, Storm Control, BPDU Attack Protection, Dynamic ARP
Inspection, DHCP Snooping, and Loopback Detect.
Select the enable or disable the error disabled recovery feature here.
Enter the time, in seconds, to recover the port from the error state
caused by the specified module. The range is from 5 to 86400.
20