D-Link DXS-3600 Series Reference Manual page 222

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in OSPF Interface Table are described below:
Parameter
VRF Name
Interface VLAN
Click the Find button to locate a specific entry based on the information entered.
After clicking the Select VRF button, the following page will appear.
The fields that can be configured are described below:
Parameter
VRF
Click the OK button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
OSPFv2 Redistribute Settings
This window is used to view and configure the OSPFv2 redistribution settings. External Routes can be
redistributed to normal areas as Type-5 external routes and redistributed to NSSA stub areas as Type-7
external routes by the ASBR.
If the redistributed external route is of Type-1, the metric represents the internal metric. If the redistributed
external route is of Type-2, the metric represents the external metric. An internal metric will consider the
cost of the route from itself to the redistributing router plus the advertised cost to reach the destination. An
external metric only considers the advertised metric to reach the destination.
By default, Connected and Static routes will not be redistributed. BGP and RIP can be redistributed to
OSPF. If no metric value is specified by the default metric, routes redistributed from other protocols will
get 20 as the metric value with the following exception. BGP will get 1 as the metric value.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Redistribute Settings,
as shown below:
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Select VRF button
to open a new window to select and use a configured VRF instance
from the list.
Enter the VLAN interface's ID to be displayed here. The range is from
1 to 4094.
Figure 6-58 OSPFv2 Interface Settings (Select VRF) Window
Description
Select the VRF instance from the list that will be used here.
211