Qcn Cp Counters; Qcn Cpid Table - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

QCN CP Counters

This window is used to view and clear the QCN CP counters.
To view the following window, click QoS > QCN > QCN CP Counters, as shown below:
The fields that can be configured in CAN CP Counters are described below:
Parameter
Unit
Port
CP
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear the counter information based on the information specified.
Click the View All button to display all the entries.
Click the Clear All button to clear the counter information associated with all entries.

QCN CPID Table

This window is used to display the relationship between the CP identifier, interface, and CP index.
To view the following window, click QoS > QCN > QCN CPID Table, as shown below:
Figure 7-35 QCN CP Counters Window
Description
Select the switch's unit ID that will be used here.
Select the port that will be used here.
Select the queue ID (same as the outbound queue ID) to specify which
Congestion Point (CP) to clear counters.
Figure 7-36 QCN CPID Table Window
348