Ethernet Oam Duld Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Ethernet OAM Statistics Table are described below:
Parameter
Unit
From Port ~ To Port
Action
Click the Find button to find and display the statistics information associated with the specified port(s).
Click the View All button to display all the statistics information.
Click the Clear button to clear the statistics information associated with the specified port(s).
Click the Clear All button to clear all the statistics information.

Ethernet OAM DULD Settings

This window is used to view and configure the Ethernet OAM feature's D-Link Unidirectional Link
Detection (DULD) settings. DULD is an extension of 802.3ah Ethernet OAM. It provides a mechanism to
detect a unidirectional point-to-point Ethernet link without PHY support. OAM vendor specific messages
are used in the detection. The detection process is started after OAM discovery was started but does not
complete the negotiation in the configured discovery time.
To view the following window, click OAM > Ethernet OAM > Ethernet OAM DULD Settings, as shown
below:
Figure 10-23 Ethernet OAM Statistics Table Window
Description
Select the switch's unit ID that will be used here.
Select the switch's port range that will be used here.
Select the Find option to find and display the statistics information
associated with the specified port.
Select the Clear option to clear the statistics information associated
with the specified port(s).
557