Ipv6 Static/Default Route - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
VRF Name
IP Address
Network Address
RIP
OSPF
BGP
ISIS
Connected
Hardware
Summary
Click the Find button to locate a specific entry based on the information entered.

IPv6 Static/Default Route

This window is used to view and configure the IPv6 static or default routes.
To view the following window, click L3 Features > IPv6 Static/Default Route, as shown below:
Figure 6-22 IPv4 Route Table Window
Description
Enter the VRF name here. This name can be up to 12 characters long.
Select and enter the single IPv4 address here.
Select and enter the IPv4 network address here. In the first space
enter the network prefix and in the second space enter the network
mask.
Select this option to display only RIP routes.
Select this option to display only OSPF routes.
Select this option to display only BGP routes.
Select this option to display only IS-IS routes.
Select this option to display only connected routes.
Select this option to display only hardware routes. Hardware routes are
routes that have been written into the hardware chip.
Select this option to display a summary and count of the route sources
configured on this switch.
184