D-Link DXS-3600 Series Reference Manual page 323

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Extcommunity
Route Source
Metric
Route Type
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
After clicking the Edit button in the Set Clauses column, the following page will appear.
The fields that can be configured are described below:
Description
community based on the standard or extended IP/IPv6 access list.
Select and enter the standard or extended IP/IPv6 access list's name
here. This option is used to define a clause to match the route's
extended community based on the standard or extended IP/IPv6
access list.
Select and enter the standard or extended IP/IPv6 access list's name
here. This option is used to define a clause to match the route's source
based on the standard or extended IP/IPv6 access list.
Select and enter the metric value of the route here. The range is from
0 to 4294967294. This option is used to define a clause to match the
route's metric.
Select the route type here. Options to choose from are Internal,
External, External Type-1, and External Type-2.
•
Internal: Specifies the intra-area and inter-area routes of Open
Shortest Path First (OSPF).
•
External: Specifies the autonomous system's external route of
OSPF. If the type-1 and type-2 options are not specified, type-1
and type-2 external routes are included.
•
External Type-1: Specifies the type-1 external route of OSPF.
•
External Type-2: Specifies the type-2 external route of OSPF.
Figure 6-189 Route Map (Set Clauses, Edit) Window
312