Bgp Dampening Dampened Paths Table - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in BGP Dampening Settings are described below:
Parameter
Half Life Time
Reuse Value
Suppress Value
Max Suppress Time
Unreachable Route's Half Life
Click the Apply button to accept the changes made.
The fields that can be configured in BGP Dampening Clear are described below:
Parameter
Address Family
Type
Click the Clear button to clear the entries based on the information specified.

BGP Dampening Dampened Paths Table

This window is used to display BGP dampening path information.
To view the following window, click L3 Features > BGP > BGP Dampening Dampened Paths Table, as
shown below:
Description
Enter the half-life time value here after which the accumulated penalty
of the route is decreased by half. The range is from 1 to 45 minutes.
By default, this value is 15 minutes.
Enter re-use value here. When the penalty is decreased and falls
below the reuse threshold, the route will be re-entered in the routing
table as a normal route. The range is from 1 to 20000. By default, this
value is 750.
Enter the suppress value here. When the penalty is increased and
crosses the suppress threshold, the route will become a dampening
route and will not be advertised. The range is from 1 to 20000 By
default, this value is 2000.
Enter the maximum suppress time value here that a route can be in
the dampened state. The range is from 1 to 255 minutes. By default,
this value is 4 times the half-life value, which is 60 minutes.
Enter the unreachable route's half-life time value here after which the
penalty of the unreachable routes will be down; by half. The range is
from 1 to 45 minutes. By default, this value is 15 minutes.
Description
Select the address family used here. Options to choose from are IPv4
Unicast and IPv4 VRF.
After selecting the IPv4 VRF option, enter the VRF instance's name
that will be used here. This name can be up to 12 characters long.
Alternatively, click the Please Select button to open a new window to
select and use a configured VRF instance from the list.
Select the source type that will be cleared here. Options to choose
from are All, IP Address, and Network Address.
After select the IP Address option, enter the IP address of the route
that will be cleared in the space provided.
After select the Network Address option, enter the starting and
ending IP addresses of the routes that will be cleared in the spaces
provided.
282