D-Link DXS-3600 Series Reference Manual page 626

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Domain Name
Ping Times
Timeout
Source IPv4 Address
Click the Start button to initiate the Ping Test for each individual section.
The fields that can be configured in IPv6 Ping are described below:
Parameter
Target IPv6 Address
Domain Name
Ping Times
Timeout
Source IPv6 Address
Click the Start button to initiate the Ping Test for each individual section.
After clicking the Start button in IPv4 Ping section, the following IPv4 Ping Result section will appear:
Description
Select and enter the domain name of the system to discover.
Enter the number of times desired to attempt to Ping the IPv4 address
configured in this window. Users may enter a number of times between
1 and 255. Tick the Infinite check box to keep sending ICMP Echo
packets to the specified IP address until the program is stopped.
Select a timeout period between 1 and 99 seconds for this Ping
message to reach its destination. If the packet fails to find the IP
address in this specified time, the Ping packet will be dropped.
Enter the source IPv4 address. If the current switch has more than one
IP address, you can enter one of them to this field. When entered, this
IPv4 address will be used as the packets' source IP address sent to
the remote host, or as primary IP address.
Description
Enter an IPv6 address to be pinged.
Select and enter the domain name of the system to discover.
Enter the number of times desired to attempt to Ping the IPv6 address
configured in this window. Users may enter a number of times between
1 and 255. Tick the Infinite check box to keep sending ICMP Echo
packets to the specified IPv6 address until the program is stopped.
Select a timeout period between 1 and 99 seconds for this Ping
message to reach its destination. If the packet fails to find the IP
address in this specified time, the Ping packet will be dropped.
Enter the source IPv6 address. If the current switch has more than one
IPv6 address, you can enter one of them to this field. When entered,
this IPv6 address will be used as the packets' source IP address sent
to the remote host, or as primary IP address.
615