Cos Color Mapping - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

The fields that can be configured are described below:

From Port ~ To Port

Click the Apply button to accept the changes made.

CoS Color Mapping

This window is used to view and configure the CoS color mapping settings.

To view the following window, click QoS > Advanced Settings > CoS Color Mapping, as shown below:

Figure 7-9 DSCP CoS Mapping Window

Select the switch unit that will be used for this configuration here.

Select the range of ports that will be used for this configuration here.

Select the CoS value to map to the DSCP list. Options to choose from

Enter the DSCP list value to map to the CoS value here. This value

must be between 0 and 63.