D-Link DXS-3600 Series Reference Manual page 75

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in DHCP Relay Pool Class Edit Settings are described below:
Parameter
Relay Target
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
DHCP Relay Information Settings
This window is used to view and configure the DHCP relay information.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Information
Settings, as shown below:
The fields that can be configured in DHCP Relay Information Global are described below:
Parameter
Information Trust All
information Check
Information Policy
Figure 4-47 DHCP Relay Pool Settings (Class Edit, Edit) Window
Description
Enter the DHCP relay target for relaying packets that matches the
value pattern of the option defined in the DHCP class.
Figure 4-48 DHCP Relay Information Settings Window
Description
Select this option to enable or disable the DHCP relay agent to trust
the IP DHCP relay information for all interfaces.
Select this option to enable or disable the DHCP relay agent to
validate and remove the relay agent information option in the received
DHCP reply packet.
Select the Option 82 re-forwarding policy for the DHCP relay agent.
Options to choose from are Keep, Drop, and Replace.
•
Keep - Select to discard the packet that already has the relay
option.
•
Drop - Select that the DHCP request packet that already has the
64