D-Link DXS-3600 Series Reference Manual page 65

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Netbios Node Type
Lease
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
DHCP Server Exclude Address
This window is used to view and exclude a range of IPv4 addresses from being allocated to the DHCP
client. The DHCP server automatically allocates addresses in DHCP address pools to DHCP clients. All
the addresses except the interface's IP address on the router and the excluded address(es) specified
here are available for allocation. Multiple ranges of addresses can be excluded. To remove a range of
excluded addresses, administrators must specify the exact range of addresses previously configured.
To view the following window, click Management > DHCP > DHCP Server > DHCP Server Exclude
Address, as shown below:
The fields that can be configured in DHCP Server Exclude Address are described below:
Parameter
VRF Name
Begin Address
End Address
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Description
server configured later will be added to the default interface list.
Select the NetBIOS node type for Microsoft DHCP clients here.
Options to choose from are Broadcast, Peer To Peer, Mixed, and
Hybrid. The node type of the h-node (Hybrid) is recommended. The
node type determines the method NetBIOS use to register and resolve
names. The broadcast system uses broadcasts. A p-node system uses
only point-to-point name queries to a name server (WINS). An m-node
system broadcasts first, and then queries the name server. A hybrid
system queries the name server first, and then broadcasts.
Enter and select the lease time for an IPv4 address that is assigned
from the address pool here. Enter the Days in the range from 0 to 365.
Select the Hours and Minutes from the drop-down menus.
Alternatively, the Infinite option can be selected to specify that the
lease time is unlimited.
Figure 4-31 DHCP Server Exclude Address Window
Description
Enter the VRF instance's name that will be used in this configuration
here. This name can be up to 12 characters long.
Enter the first IPv4 address of a range of addresses to be excluded
here.
Enter the last IPv4 address of a range of addresses to be excluded
here.
54