D-Link DXS-3600 Series Reference Manual page 587

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Figure 11-16 MPLS QoS Settings (Edit, Inbound EXP to CoS Settings) Window

The fields that can be configured in Inbound EXP to CoS Settings are described below:

Click the Apply button to accept the changes made.

Click the Back button to return to the previous window.

After clicking the Outbound CoS to EXP Settings tab, the following page will appear.

Figure 11-17 MPLS QoS Settings (Edit, Outbound CoS to EXP Settings) Window

The fields that can be configured in Outbound CoS to EXP Settings are described below:

Select the list of CoS values (on the right) to be mapped to EXP values

(on the left) here. This feature is used to configure the Class of Service

(CoS) to the Experimental bits (EXP) mapping of the policy. The range

is from 0 to 7. Select the Default option to use the default value.

Select the EXPs (on the right) to be mapped to CoS values (on the left)

here. This feature is used to configure the class EXP to CoS mapping

of the policy. The range is from 0 to 7. Select the Default option to use

the default value.