Lldp Statistics Information - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in LLDP-DCBX Port Settings are described below:
Parameter
Unit
From Port ~ To Port
ETS Configuration TLV
ETS Recommendation TLV
Priority-based Flow Control
Configuration TLV
Click the Apply button to accept the changes made.

LLDP Statistics Information

This window is used to view the neighbor detection activity, LLDP Statistics and the settings for individual
ports on the Switch.
To view the following window, click L2 Features > LLDP > LLDP Statistics Information, as shown
below:
Figure 5-79 LLDP-DCBX Port Settings Window
Description
Select the switch's unit ID that will be used here.
Select the switch's port range that will be used here.
Select to enable or disable Enhanced Transmission Selection (ETS)
configuration TLV feature here. This specifies the ETS Configuration
TLV to be sent. The Enhanced Transmission Selection Configuration
TLV is an optional TLV that allows a bridge port to advertise the
current ETS operational state and willing bit.
Select to enable or disable the ETS recommendation TLV feature
here. This specifies the ETS Recommendation TLV to be sent. The
Enhanced Transmission Selection Recommendation TLV is an
optional TLV that allows a bridge port to advertise the ETS
recommendation for the operational state of the remote port.
Select to enable or disable the Priority-based Flow Control (PFC)
configuration TLV feature here. This specifies the PFC Configuration
TLV to be sent. The Priority-based Flow Control TLV is an optional
TLV that allows a bridge port to advertise the PFC current operational
state and willing bit.
165