Time Range - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
The fields that can be configured in SNTP Server Settings are described below:
Parameter
IPv4 Address
VRF Name
Click the Add button to add the SNTP server.
Click the Delete button to remove the specified entry.

Time Range

This window is used to view and configure the time profile settings.
To view the following window, click System > Time Range, as shown below:
The fields that can be configured are described below:
Parameter
Range Name
From Week ~ To Week
From Time ~ To Time
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Description
99999 seconds. The default interval is 720 seconds.
Description
Enter the IP address of the SNTP server which provides the clock
synchronization.
Enter the name of the VRF instance which the SNTP server belongs
to.
Figure 3-25 Time Range Window
Description
Enter the time profile's range name here. This name can be up to 32
characters long.
Select the starting and ending days of the week that will be used for
this time profile. Tick the Daily option to use this time profile for every
day of the week. Tick the End Week Day option to use this time profile
from the starting day of the week until the end of the week, which is
Sunday.
Select the starting and ending time of the day that will be used for this
time profile. The first drop-down menu selects the hour and the second
drop-down menu selects the minute.
29