D-Link DXS-3600 Series Reference Manual page 159

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in MLD Snooping Static Groups Settings are described below:
Parameter
VID
Group Address
Unit
From Port ~ To Port
VID
Group Address
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
The fields that can be configured in MLD Snooping Groups Table are described below:
Parameter
VID
Group Address
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the entries.
MLD Snooping Filter Settings
This window is used to view and configure the MLD snooping feature's settings.
Figure 5-65 MLD Snooping Groups Settings Window
Description
Enter the VLAN ID of the multicast group here. The range is from 1 to
4094.
Enter the IPv6 multicast group address here.
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Click the radio button and enter a VLAN ID of the multicast group. The
range is from 1 to 4094.
Click the radio button and enter an IP multicast group address.
Description
Click the radio button and enter a VLAN ID of the multicast group. The
range is from 1 to 4094.
Click the radio button and enter an IP multicast group address.
148