Firmware Upgrade - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
File
•
Print Setup - Will view the image to be printed.
•
Print Topology - Will print the topology map.
•
Preference - Will set display properties, such as polling interval, and the views to open at SIM
startup.
Group
•
Add to group - Add a candidate to a group. Clicking this option will reveal the following dialog box
for the user to enter a password for authentication from the Candidate Switch before being added to
the SIM group. Click OK to enter the password or Cancel to exit the dialog box.
•
Remove from group - Remove an MS from the group.
Device
•
Configure - Will open the Web manager for the specific device.
View
•
Refresh - Update the views with the latest status.
•
Topology - Display the Topology view.
Help
•
About - Will display the SIM information, including the current SIM version.

Firmware Upgrade

This window is used to view and upgrade firmware from the Commander Switch to the Member Switch.
Member Switches will be listed in the table
To view the following window, click Management > Virtual Stacking (SIM) > Firmware Upgrade, as
shown below:
Figure 4-76 Input password Window
Figure 4-77 About Window
86